44″ rough cut model with a non-commercial grade single cylinder electric start engine and manual clutch blade engagement. Works great behind an ATV for smaller acreage jobs or tight clearance conditions.
Features
19HP Briggs & Stratton Professional non-commercial grade single cylinder engine
The blade spindles used on the AcrEase mowers are built out of heavy duty welded steel hubs, 30mm (1-3/16″) steel shafts, machined steel blade holders and large sealed ball bearings.
The cutting height can quickly and easily be adjusted from 2″-8″ with the single crank height adjustment system.
The main deck is built out of 10 GA (.135″) thick steel with a 3/16″ thick steel top plate for reinforcement. An additional 1/4″ thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just under 5/8″ thick.
Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.
The blades are easily engaged by simply shifting a manual clutch lever.
The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.
Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time
An extra front and back tire can be added to the center section of the mower deck.
– Great for mowing around ponds and on rough uneven ground where scalping would normally occur
– Clamping style receiver allows for adjustments from side to side with both the front and rear tires
– Pinned receivers make for quick kit removal when not needed
– Works on all existing and new rough cut mowers
The Wetlands Kit consists of an extra set of tires and mounting brackets.
– Great for wetlands or marshy areas that stay wet all year around
– Works well in combination with small personal amphibious vehicles and ATVs/UTVs with tracks
– Kit more than doubles the tire surface area in contact with the ground
– Easy to install. Works on all existing and new rough cut mowers.
– The rough cut mower will not float with the wetlands kit installed. Water greater than 2-3″ in depth should be avoided.
– With the Wetlands Kit installed the minimum cutting height is 3.5″-4″.
– Works on all existing and new rough cut mowers
The Electric Lift Kit consists of all of the mounting hardware, brackets, electric actuator and wiring with remote control panel.
– Great for constantly changing terrain and grass/brush heights
– Allows for quick cutting height changes on the go from the seat of the tow vehicle
– Raise up and over rocks and logs with ease
– Heavy duty 1500 lb linear screw actuator made by Linak
– Works on all existing and new rough cut mowers
A variety of hitching is available to pull multiple rough cut mowers in a couple different configurations.
Urethane foam flat proof tires can be purchased for both new and existing mowers.
As an authorized dealer of Health Mate Saunas, Darryl’s Stuff can help you select, deliver, and construct the structure you need. Call 330-637-9947 today to get your project started.
Send us details of your project and we’ll get back to you on options and cost.
© 2018 All rights reserved